
JRex Accessories
JRex Accessories serve with additional items that facilitate using these Single Board Computers or help to add useful parts such as storing devices.
Evaluation Board to adapt LVDS flatpanels via JILI cable.
KAB-ADAPT-LVDS is an Eval Board to adapt (S)VGA-, (S)XGA-LVDS TFT flatpanels via JILI interface, if there is not an appropriate JILI cable, but a fitting JILI-30 cable available for the chosen display ...
En savoir plus
KAB-ADAPT-LVDS is an Eval Board to adapt (S)VGA-, (S)XGA-LVDS TFT flatpanels via JILI interface, if there is not an appropriate JILI cable, but a fitting JILI-30 cable available for the chosen display ...
En savoir plus
KAB-ADAPT-LVDStoTTL, Adapter to connect TTL Flat Panels to JILI30 InterfaceThe KAB-ADAPT-LVDStoTTL converts LVDS signals from JILI30 connector into typical TTL Level Signals.(for Panels without LVDS interface) The adapter has been developed for ease of ...
En savoir plus
Adapter without cable, two 44 pin 2mm grid headers, one 40 pin 2.54mm header.
The chipDISK-ADA1 adaptor in 2.5" footprint allows to use chipDISK exchangeable data storage devices together with 2.5" and 3.5" harddrives like HDD or DVD-drives. Being equipped ...
En savoir plus
The chipDISK-ADA1 adaptor in 2.5" footprint allows to use chipDISK exchangeable data storage devices together with 2.5" and 3.5" harddrives like HDD or DVD-drives. Being equipped ...
En savoir plus
CFC-ADA-1, 2.5" size adaptor for CompactFlash and Microdrive
The CFC-ADA-1 adaptor in 2.5" footprint allows to use CompactFlash and Microdrive exchangeable data storage devices. Being equipped with both 40 and 44 pin IDE interface, 2.5" and 3.5" harddrives ...
En savoir plus
The CFC-ADA-1 adaptor in 2.5" footprint allows to use CompactFlash and Microdrive exchangeable data storage devices. Being equipped with both 40 and 44 pin IDE interface, 2.5" and 3.5" harddrives ...
En savoir plus
ADA-FLOPPY-2, adaptor and cable to connect a standard floppy drive to any MOPS
ADA-FLOPPY-2 consists of an Adaptor-Card and flatfoil cable to connect a standard floppy drive to any MOPS.
En savoir plus
ADA-FLOPPY-2 consists of an Adaptor-Card and flatfoil cable to connect a standard floppy drive to any MOPS.
En savoir plus
Cable, one side DSUB25 female connector, other side for 26 pin header - for LPT
KAB-DSUB25-1 cable, one side DSUB25 female connector, other side for 26 pin header - for LPT
En savoir plus
KAB-DSUB25-1 cable, one side DSUB25 female connector, other side for 26 pin header - for LPT
En savoir plus
KAB-IDE-1, IDE cable for 40 pin 3.5" Hard Disk (2.54 mm)
KAB-IDE-1 cable, IDE cable for 40 pin 3.5" Hard Disk (2.54 mm)
En savoir plus
KAB-IDE-1 cable, IDE cable for 40 pin 3.5" Hard Disk (2.54 mm)
En savoir plus
Floppy Cable for FLOPPY-MOPS-1, 230 mm
KAB-FLOPPY/MOPS-1, Flatfoil floppy cable for FLOPPY-MOPS-1, 230 mm
En savoir plus
KAB-FLOPPY/MOPS-1, Flatfoil floppy cable for FLOPPY-MOPS-1, 230 mm
En savoir plus
KAB-PS/2Y-1, Y-cable for parallel use of PS/2 keyboard and mouse
KAB-PS/2Y-1, Y-Cable for parallel use of PS/2 keyboard and mouse. 1 x 6 pol Mini DIN connector - 2 x 6 pol Mini DIN coupling, approximately 15 cm connecting cable.
En savoir plus
KAB-PS/2Y-1, Y-Cable for parallel use of PS/2 keyboard and mouse. 1 x 6 pol Mini DIN connector - 2 x 6 pol Mini DIN coupling, approximately 15 cm connecting cable.
En savoir plus
ATX feature/Reset switch with LEDs for LAN and IDE operation status display. For all JRex boards.
ATX/Reset/2LED connector, ATX feature/Reset switch with LEDs for LAN and IDE operation status display. For all JRex boards.
En savoir plus
ATX/Reset/2LED connector, ATX feature/Reset switch with LEDs for LAN and IDE operation status display. For all JRex boards.
En savoir plus
Mounting Kit for JRex boards with threaded bolts and screws
The JRex-JFLEX™-Mounting-Kit for JRex boards allows to mount a JFLEX™ I/O module on a JRex. Simply stack the units together and use the bolts and screws to firmly lock them together. ...
En savoir plus
The JRex-JFLEX™-Mounting-Kit for JRex boards allows to mount a JFLEX™ I/O module on a JRex. Simply stack the units together and use the bolts and screws to firmly lock them together. ...
En savoir plus
JRC1, Remote Control Software with serial cable (License charge to be payed only once!)
The JRC1 includes Software with the possibility to read or write the memory contents (CMOS RAM, EEPROM, NVRAM, Flash, Hard or Floppy Disks) of an Embedded Computer, which ...
En savoir plus
The JRC1 includes Software with the possibility to read or write the memory contents (CMOS RAM, EEPROM, NVRAM, Flash, Hard or Floppy Disks) of an Embedded Computer, which ...
En savoir plus
Ejection arm to mount on the MOPSlcdGX1 and JRex for CFC-Type1 surface use.
CFC-Eject 1 Mechanical part (Ejection arm to mount on the MOPSlcdGX1 and JRex for CFC-Type1 surface use.)
En savoir plus
CFC-Eject 1 Mechanical part (Ejection arm to mount on the MOPSlcdGX1 and JRex for CFC-Type1 surface use.)
En savoir plus
CFC-192, Compact Flash Card Type I with 192 MByte
CFC-192, COMPACT Compact Flash Card Type I with 192 MByte
En savoir plus
CFC-192, COMPACT Compact Flash Card Type I with 192 MByte
En savoir plus
CFC-128, Compact Flash Card Type I with 128 MByte
CFC-128, COMPACT Compact Flash Card Type I with 128 MByte
En savoir plus
CFC-128, COMPACT Compact Flash Card Type I with 128 MByte
En savoir plus
CFC-64, Compact Flash Card Type I with 64 MByte
CFC-64, COMPACT Compact Flash Card Type I with 64 MByte
En savoir plus
CFC-64, COMPACT Compact Flash Card Type I with 64 MByte
En savoir plus
CFC-32, Compact Flash Card Type I with 32 MByte
CFC-32, COMPACT Compact Flash Card Type I with 32 MByte
En savoir plus
CFC-32, COMPACT Compact Flash Card Type I with 32 MByte
En savoir plus
France
RSS |